Search

Industrial 3 way push button switchSurface MountedHas Up / Stop / Down buttons with arrows on the up and down buttons70mm x 1350mm x 60mmEasy to installSuitable for roller shutter doorsAlso available as an isolator version with a keyPlease see our related products area below for the key switch boxes..

Genuine Ellard Athena Handset - Black (see our related products for the other Ellard handsets - you must use the same handset as your existing as they are all different)The Remote controls have independent Open, Close & Stop Buttons.Very easy to program up to your existing Ellard Control UnitCom..

Designed for use on tubular motors up to 230NM with a maximum output of 750W at 3.2AThis product is for the easyfit control panel only - transmitters can be purchased separately to allow remote control (with a maximum of 30 transmitters being able to be programmed up to this unit)Programmable run ti..

Designed for use on tubular motors up to 230NM with a maximum output of 750W at 3.2AComes with 2 handsets  (with a maximum of 30 transmitters being able to be programmed to this unit)Programmable run timer 5 – 100 secondsDIPswitch available which reverses the direction of the motor without the ..

Ellard Genesis Control Unit complete with 2 x handsetsFor use with roller shutters which have a tube motor with 4 wires in the motor cable (Live, Earth, Up, Down)Comes complete with two transmitters (This unit comes with 2 x Black Handsets) Has the operation buttons on the front of the unit100 ..

Ellard Genesis Control Unit complete with 2 x handsetsFor use with roller shutters which have a tube motor with 4 wires in the motor cable (Live, Earth, Up, Down)Comes complete with two transmitters (This unit comes with 2 x White Handsets) Has the operation buttons on the front of the uni..

Ellard Reflector Type Photocell KitWorks with the Genesis control units we stock - see our related products area belowRange: 7m5 Wire TypeComes with bracket & fixings..

Replacement Ellard Handset - Old Style Blue (see our related products for the other Ellard handsets - you must use the same handset as your existing as they are all different)Image 1 shows the old blue handset (which is now unavailable, and for ID purposes) and replaced by the handset in image 2 whi..

Replacement Ellard Handset - Old Style White (see our related products for the other Ellard handsets - you must use the same handset as your existing as they are all different)Image 1 shows the old white handset (which is now unavailable, and for ID purposes) and replaced by the handset in image 2 w..

1 x Genuine Eurodrive Remote control Handset for Roller Shutter Electric Doors. The handsets are sold as singlesFor use with the Eurodrive DRS Qualkit Remote Control Units (see last image for identification purposes only)Handset is Black and White and has 2 buttons on itVery easy to program up to yo..

1 x Eurodrive Remote control Handset for Roller Shutter Electric Doors. The handsets are sold as singles - the first image shows 2 handsets so you can see it with and without the buttonsFor use with the Eurodrive DRS Remote Control Units (see last 2 images for identification purposes only)Handset is..

Eurodrive EUROKIT X Remote control unit for Roller Shutter Electric DoorsComplete with 2 x Wireless Handsets with sliding covers to protect the buttonsControl Unit has built in courtesy light above itThe Control Box can accept up to 60 fobs maximumSuitable for roller shutter doors which have a 230V ..

1 x Genuine Eurodrive Remote control Handset for Roller Shutter Electric Doors. The handsets are sold as singlesFor use with the Eurodrive DRS900 Remote Control Units (see last image for identification purposes only)Handset is Black and has 2 buttons on it (please see our relates products area if yo..

1 x Genuine Eurodrive Remote control Handset for Roller Shutter Electric Doors. The handsets are sold as singlesFor use with the Eurodrive DRS900 Remote Control Units (see last image for identification purposes only)Handset is Black and has 3 buttons on it (up / stop / down) and comes with plastic c..

Reflector Type Photocell Kit which fits the Eurodrive Eurokit control unit (see our related products area below)Range: 7m5 Wire Type (usually only 4 wires are needed to wire up)Comes with bracket & fixings..

Eurodrive Remote control unit for Roller Shutter Electric DoorsComplete with 2 x Wireless Handsets with sliding covers to protect the buttonsThe Control Box can accept up to 60 fobs maximumSuitable for roller shutter doors which have a 230V tubular motor fitted. 3 minute programmable run-time&n..

EuroDrive Tubular MotorMotor Speed is 15rpm - many others are only 12rpm. The Eurodrive motors are high quality.Diameter: 45mm - E40M/0                              E60M/0               ..

Genuine Garador/Hormann Top Mounting Bracket For fixing a door motor operator to a Hormann/Garador sectional or 1 piece up and over garage doorThis is a metal bracket which attaches to the top of the garage door Please see our website and related products area below for other spares..

Garage Door Operator – Garamtic 9 BiSecur – NEW Series 4 (Head Only) - comes pre-fitted with mains plug & 2 remote control handsetsThe Garamtic 9 garage door operators feature the same proven Hörmann technology as all Garador premium operators. This guarantees reliable function – at an..

Garador Type K (short) Boom – 2475mm Travel LengthSuitable for all Garamatic garage door opener headsUp-and-over doors up to 2500 mm highSectional doors with track application N up to 2250 mm highSectional doors with track application L/Z/H up to 2125 mm highTotal length 3200 mm, travel distanc..

1 x Garolla Eurodrive Remote control Handset for Roller Shutter Electric Doors. The handsets are sold as singles - the first image shows 2 handsets so you can see it with and without the buttonsFor use with the Eurodrive DRS Remote Control Units (see last 2 images for identification purposes only)Ha..

Garolla Eurodrive Remote control unit for Roller Shutter Electric DoorsComplete with 2 x Wireless Handsets with sliding covers to protect the buttonsThe Control Box can accept up to 60 fobs maximumSuitable for roller shutter doors which have a 230V tubular motor fitted. 3 minute programmable ru..

Genuine Garador/Hormann Top Mounting Bracket For fixing a door motor operator to a Hormann/Garador sectional or 1 piece up and over garage doorThis is a metal bracket which attaches to the top of the garage door Please see our website and related products area below for other spares..

Garage Door Operator – ProMatic BiSecur – NEW Series 4 (Head Only) - comes pre-fitted with mains plug & 2 remote control handsetsThe ProMatic garage door operators feature the same proven Hörmann technology as all Hörmann premium operators. This guarantees reliable function – at an att..

Hormann Type K (short) Boom – 2475mm Travel LengthSuitable for all SupraMatic and ProMatic garage door opener headsUp-and-over doors up to 2500 mm highSectional doors with track application N up to 2250 mm highSectional doors with track application L/Z/H up to 2125 mm highTotal l..

Type L (long) Boom – 3400mm Travel LengthSuitable for all SupraMatic and ProMatic garage door opener headsSectional doors with track application N/L/Z/H up to 3000 mm highTotal length 4125 mm, travel distance 3400 mmFor alternative length booms please see other listings...

Hormann Type M (medium) Boom –  2725mm Travel LengthSuitable for all SupraMatic and ProMatic garage door opener headsUp-and-over doors up to 2750 mm highSectional doors with track application N up to 2500 mm highSectional doors with track application L/Z/H up to 2375 mm high..

Marantec Comfort 260 – Operator system for garage doorsOperator system for garage doors – domestic useFor up-and-over doors up to a door width of 3500 mm and a door weight of 90 KgFor single-skinned sectional doors up to a door width of 5000 mm and a door weight of 90 KgFor double-skinned sectional ..

Marantec Comfort 260 – Operator system for garage doorsOperator system for garage doors – domestic useFor up-and-over doors up to a door width of 3500 mm and a door weight of 90 KgFor single-skinned sectional doors up to a door width of 5000 mm and a door weight of 90 KgFor double-skinned sectional ..

Comfort 270 – Operator system for garage doorsMotor unit Comfort 270 (Standard) complete with SZ11 Boom (Rail)Operator system for garage doors – domestic useFor up-and-over doors up to a door width of 5000 mm and a door weight of 165 KgFor single-skinned sectional doors up to a door width of 5500 mm..

Comfort 270 – Operator system for garage doorsMotor unit Comfort 270 (Standard)Operator system for garage doors – domestic useFor up-and-over doors up to a door width of 5000 mm and a door weight of 165 KgFor single-skinned sectional doors up to a door width of 5500 mm and a door weight of 165 KgFor..

Marantec Comfort 280 – Operator system for garage doorsOperator system for garage doors – domestic useFor up-and-over doors up to a door width of 6000 mm and a door weight of 200 KgFor single-skinned sectional doors up to a door width of 6000 mm and a door weight of 200 KgFor double-skinned sectiona..

Marantec Comfort 280 – Operator system for garage doorsOperator system for garage doors – domestic useFor up-and-over doors up to a door width of 6000 mm and a door weight of 200 KgFor single-skinned sectional doors up to a door width of 6000 mm and a door weight of 200 KgFor double-skinned sectiona..

Marantec standard Belt Rail (Boom)Suits all the current Marantec Motor Head units in our rangeA one-piece SZ11 STANDARD Beltdrive railMeasurements (L) 3080 mmLength of travel 2475 mmPacking length 3140 mm..

High Quality NECO Remote Control System complete with 2 x Wireless Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors which have a 230V tubular motor fitted.  Has Control buttons on the side of the casingCan switch between auto close and deadman functionsI..

High Quality NECO Remote Control System complete with 2 x Wireless Handsets with sliding covers to protect the buttonsIt is water resistant, enclosed in an IP rated box. It is IP44 rated.Suitable for roller shutter doors which have a 230V tubular motor fitted.  Switch inside allows you to ..

NECO Euro Garage Roller Door Remote Control System - comes complete with 2 handsets The NECO Garage Remote Control is very popular among garage door users.  It can be wired up to a photocell kit or light guard - allowing for a Stop and Return function for safety purposes (please see our re..

NECO Euro Garage Roller Door Remote Control System with courtesy light - comes complete with 2 handsetsPLEASE NOTE, THERE IS A ANOTHER BOX WHICH LOOKS IDENTICAL, BUT IT HAS A METAL AERIAL COMING OUT OF THE LEFT HAND SIDE AND THE HANDSETS ARE GREY WITH 4 COLOURED BUTTONS. THAT IS A PDT SYSTE..

1 x NECO MK1 Remote Control Unit complete with 2 handsetsThe NECO MK 1 remote control is our most popular remote control system.    It is water resistant, enclosed in an IP rated box. It is IP44 rated.The MK1 can be used with up to 100 rolling code handsets and can be operated automat..

Neco Photocell Safety Beam Kit The Safety Beams are prewired to a transmitter and circular reflector.They are a safety feature: when they detect an obstruction they will automatically raise the shutter/door and prevent injury or damage.Installation instructions 1x bracket, reflector, photo..

High Quality NVM Frequency Remote Control System complete with 2 x Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors which have a 230V tubular motor fitted.  The Remote controls have independent Open, Close & Stop Buttons.Plug in terminals, receiver a..

High Quality NVM Frequency Remote Control System complete with 2 x Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors which have a 230V tubular motor fitted. This receiver kit has a built in Wifi module and also bluetooth capability.  So you are able to co..

NVM Reflector Type Photocell KitWorks with the NT1006 & NT1006E control units we stock - see our related products area belowRange: 7m5 Wire TypeNT1031 Reflector Type PhotocellProduct Code:NT1031Comes with bracket & fixings..

Genuine NVM Handset with sliding cover to protect the buttonsThis handset is the multi (four) channel version - meaning it can operate upto 4 doors providing they all have the same control unit box fitted - please see our related products area below if you require the standard single channel handset..

Genuine NVM Handset with sliding cover to protect the buttons fitted to units supplied after May 2012Please note, we also stock the Pre May 2012 (NT1103A) handset in our related products area below. Both handsets look identical.  If you are unsure of your control unit's date, the..

High Quality NVM Remote Control System complete with 2 x Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors 10a 230v Ac for 3ph Operators.  This Panel is designed to function with a Volt Free connection to 3 Phase Operators via 3 Button Stat..

High Quality NVM Remote Control System complete with 2 x Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors which have a 230V tubular motor fitted.  Separate Photocell function with built-in run timer. The Remote controls have independent Op..

High Quality NVM Remote Control System complete with 2 x Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors which have a 230V tubular motor fitted.  Separate Photocell function with built-in run timer. The Remote controls have independent Op..

High Quality NVM Remote Control System complete with 2 x Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors which have a 230V tubular motor fitted.  The Remote controls have independent Open, Close & Stop Buttons.Plug in terminals, receiver accepts upt..

Roller Shutter Industrial Key Switches - PAIR - KEYED ALIKEComes with 3 keys per box, all 6 keys will work with both boxesSurface MountedHeavy Duty, anti-vandal casing with a sprig loaded safety featureCentre (Off) & Up / Down arrows6 x keys supplied75mm x 75mm x 45mmComes with instructions and ..

Genuine PM1 Handset with sliding cover to protect the buttonsPlease note, this is a genuine PM1 manufacturer handset, NOT a copy.Suitable for PM Paramount control units - please see our related products area below if you require the complete box  The Remote controls have independent Open, ..

High Quality Genuine PM1 Remote Control System complete with 2 x Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors which have a 230V tubular motor fitted.  The Remote controls have independent Open, Close & Stop Buttons.Plug in terminals, receiver acc..

Roller Shutter Industrial Key SwitchSurface MountedHeavy Duty, anti-vandal casing with a sprig loaded safety featureCentre (Off) & Up / Down arrows3 x keys supplied75mm x 75mm x 45mmComes with instructions and wiring diagramSuitable for industrial and residential roller shutter doorsPlease see o..

Roller Shutter Industrial Key Switch - Keyed AlikePLEASE NOTE, THIS PRODUCT IS FOR A KEYED ALIKE KEY SWITCH - SO YOU NEED TO CHANGE THE QUANTITY TO HOWEVER MANY YOU REQUIRE AND THEY WILL BE ALL SENT OUT USING THE SAME KEY. IF YOU ONLY REQUIRE 1 KEY SWITCH, PLEASE SEE OUR RELATED PRODUCTS AREA BEL..

An adjuster tool which allows the adjustment of the upper and lower motor limits on a roller shutter tube motorWill adjust on tubular motors for both domestic and industrial/commercial doorsAlso known as a stick or wandis 4mm on the endAdjusts the limits on a tube motor which have the twist limit ad..

1 x Universal garage door remote control receiver kitThis radio control sets provide a fast and easy solution to upgrading older garage door remote control handsets and receivers particularly when the original parts are no longer available and the only option seems to be a new opener. Radi..

1 x Universal garage door remote control receiver kit HandsetWorks with the receiver kit we supply - see 2nd image (for identification purposes only).  If you need the full kit, see our related products area below Radio frequency: 433MHz - Rolling Code    ..

Replacement V2 Handset - for Contract 597 (please check the label on the back of your handset for a c597 code)This c597 codes was used on Autoroll garage doors.  See our related products area below for the C694 code handsets.Image 1 shows both the 2 button Phox2 and 4 Button Phox4 handsets - fo..

Replacement V2 Handset - for Contract 694 (please check the label on the back of your handset for a c694 code)Image 1 shows both the 2 button Phox2 and 4 Button Phox4 handsets - for ID purposesThe Remote control has 2 or 4 buttons (this means 2 or 4 channel which means it will work 2 or 4 doors as l..