Search

Industrial 3 way push button switchSurface MountedHas Up / Stop / Down buttons with arrows on the up and down buttons70mm x 1350mm x 60mmEasy to installSuitable for roller shutter doorsAlso available as an isolator version with a keyPlease see our related products area below for the key switch boxes..

1 x E-King 433-4C Series handset  Radio frequency: 433MHz    RED buttons - Please see our related products area below for the grey button version - you must use like-for-like otherwise it will not programSupplied complete with CR2032 battery, visor clip, wall mounting bracket a..

Genuine Ellard Athena Handset - Black (see our related products for the other Ellard handsets - you must use the same handset as your existing as they are all different)The Remote controls have independent Open, Close & Stop Buttons.Very easy to program up to your existing Ellard Control UnitCom..

Designed for use on tubular motors up to 230NM with a maximum output of 750W at 3.2AThis product is for the easyfit control panel only - transmitters can be purchased separately to allow remote control (with a maximum of 30 transmitters being able to be programmed up to this unit)Programmable run ti..

Designed for use on tubular motors up to 230NM with a maximum output of 750W at 3.2AComes with 2 handsets  (with a maximum of 30 transmitters being able to be programmed to this unit)Programmable run timer 5 – 100 secondsDIPswitch available which reverses the direction of the motor without the ..

Ellard Genesis Control Unit complete with 2 x handsetsFor use with roller shutters which have a tube motor with 4 wires in the motor cable (Live, Earth, Up, Down)Comes complete with two transmitters (This unit comes with 2 x Black Handsets) Has the operation buttons on the front of the unit100 ..

Ellard Genesis Control Unit complete with 2 x handsetsFor use with roller shutters which have a tube motor with 4 wires in the motor cable (Live, Earth, Up, Down)Comes complete with two transmitters (This unit comes with 2 x White Handsets) Has the operation buttons on the front of the uni..

Ellard Reflector Type Photocell KitWorks with the Genesis control units we stock - see our related products area belowRange: 7m5 Wire TypeComes with bracket & fixings..

Replacement Ellard Handset - Old Style Blue (see our related products for the other Ellard handsets - you must use the same handset as your existing as they are all different)Image 1 shows the old blue handset (which is now unavailable, and for ID purposes) and replaced by the handset in image 2 whi..

Replacement Ellard Handset - Old Style White (see our related products for the other Ellard handsets - you must use the same handset as your existing as they are all different)Image 1 shows the old white handset (which is now unavailable, and for ID purposes) and replaced by the handset in image 2 w..

1 x Genuine Eurodrive Remote control Handset for Roller Shutter Electric Doors. The handsets are sold as singlesFor use with the Eurodrive DRS Qualkit Remote Control Units (see last image for identification purposes only)Handset is Black and White and has 2 buttons on itVery easy to program up to yo..

1 x Eurodrive Remote control Handset for Roller Shutter Electric Doors. The handsets are sold as singles - the first image shows 2 handsets so you can see it with and without the buttonsFor use with the Eurodrive DRS Remote Control Units (see last 2 images for identification purposes only)Handset is..

Eurodrive EUROKIT X Remote control unit for Roller Shutter Electric DoorsComplete with 2 x Wireless Handsets with sliding covers to protect the buttonsControl Unit has built in courtesy light above itThe Control Box can accept up to 60 fobs maximumSuitable for roller shutter doors which have a 230V ..

1 x Genuine Eurodrive Remote control Handset for Roller Shutter Electric Doors. The handsets are sold as singlesFor use with the Eurodrive DRS900 Remote Control Units (see last image for identification purposes only)Handset is Black and has 2 buttons on it (please see our relates products area if yo..

1 x Genuine Eurodrive Remote control Handset for Roller Shutter Electric Doors. The handsets are sold as singlesFor use with the Eurodrive DRS900 Remote Control Units (see last image for identification purposes only)Handset is Black and has 3 buttons on it (up / stop / down) and comes with plastic c..

Reflector Type Photocell Kit which fits the Eurodrive Eurokit control unit (see our related products area below)Range: 7m5 Wire Type (usually only 4 wires are needed to wire up)Comes with bracket & fixings..

Eurodrive Remote control unit for Roller Shutter Electric DoorsComplete with 2 x Wireless Handsets with sliding covers to protect the buttonsThe Control Box can accept up to 60 fobs maximumSuitable for roller shutter doors which have a 230V tubular motor fitted. 3 minute programmable run-time&n..

1 x Garolla Eurodrive Remote control Handset for Roller Shutter Electric Doors. The handsets are sold as singles - the first image shows 2 handsets so you can see it with and without the buttonsFor use with the Eurodrive DRS Remote Control Units (see last 2 images for identification purposes only)Ha..

Garolla Eurodrive Remote control unit for Roller Shutter Electric DoorsComplete with 2 x Wireless Handsets with sliding covers to protect the buttonsThe Control Box can accept up to 60 fobs maximumSuitable for roller shutter doors which have a 230V tubular motor fitted. 3 minute programmable ru..

Henderson RLB type T-Handle Garage Door Lock finished in Chrome Suitable for older type Henderson Doors Spindle is 75mm, set on a diamond - can be cut to suit 18mm spigots (bolt stumps) which are 50mm apart Comes with foam backing pad, 2 keys and fixing bolts ..

High Quality NECO Remote Control System complete with 2 x Wireless Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors which have a 230V tubular motor fitted.  Has Control buttons on the side of the casingCan switch between auto close and deadman functionsI..

High Quality NECO Remote Control System complete with 2 x Wireless Handsets with sliding covers to protect the buttonsIt is water resistant, enclosed in an IP rated box. It is IP44 rated.Suitable for roller shutter doors which have a 230V tubular motor fitted.  Switch inside allows you to ..

NECO Euro Garage Roller Door Remote Control System - comes complete with 2 handsets The NECO Garage Remote Control is very popular among garage door users.  It can be wired up to a photocell kit or light guard - allowing for a Stop and Return function for safety purposes (please see our re..

NECO Euro Garage Roller Door Remote Control System with courtesy light - comes complete with 2 handsetsPLEASE NOTE, THERE IS A ANOTHER BOX WHICH LOOKS IDENTICAL, BUT IT HAS A METAL AERIAL COMING OUT OF THE LEFT HAND SIDE AND THE HANDSETS ARE GREY WITH 4 COLOURED BUTTONS. THAT IS A PDT SYSTE..

1 x NECO MK1 Remote Control Unit complete with 2 handsetsThe NECO MK 1 remote control is our most popular remote control system.    It is water resistant, enclosed in an IP rated box. It is IP44 rated.The MK1 can be used with up to 100 rolling code handsets and can be operated automat..

Neco Photocell Safety Beam Kit The Safety Beams are prewired to a transmitter and circular reflector.They are a safety feature: when they detect an obstruction they will automatically raise the shutter/door and prevent injury or damage.Installation instructions 1x bracket, reflector, photo..

High Quality NVM Frequency Remote Control System complete with 2 x Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors which have a 230V tubular motor fitted.  The Remote controls have independent Open, Close & Stop Buttons.Plug in terminals, receiver a..

High Quality NVM Frequency Remote Control System complete with 2 x Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors which have a 230V tubular motor fitted. This receiver kit has a built in Wifi module and also bluetooth capability.  So you are able to co..

NVM Reflector Type Photocell KitWorks with the NT1006 & NT1006E control units we stock - see our related products area belowRange: 7m5 Wire TypeNT1031 Reflector Type PhotocellProduct Code:NT1031Comes with bracket & fixings..

Genuine NVM Handset with sliding cover to protect the buttonsThis handset is the multi (four) channel version - meaning it can operate upto 4 doors providing they all have the same control unit box fitted - please see our related products area below if you require the standard single channel handset..

Genuine NVM Handset with sliding cover to protect the buttons fitted to units supplied after May 2012Please note, we also stock the Pre May 2012 (NT1103A) handset in our related products area below. Both handsets look identical.  If you are unsure of your control unit's date, the..

High Quality NVM Remote Control System complete with 2 x Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors 10a 230v Ac for 3ph Operators.  This Panel is designed to function with a Volt Free connection to 3 Phase Operators via 3 Button Stat..

High Quality NVM Remote Control System complete with 2 x Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors which have a 230V tubular motor fitted.  Separate Photocell function with built-in run timer. The Remote controls have independent Op..

High Quality NVM Remote Control System complete with 2 x Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors which have a 230V tubular motor fitted.  Separate Photocell function with built-in run timer. The Remote controls have independent Op..

High Quality NVM Remote Control System complete with 2 x Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors which have a 230V tubular motor fitted.  The Remote controls have independent Open, Close & Stop Buttons.Plug in terminals, receiver accepts upt..

Roller Shutter Industrial Key Switches - PAIR - KEYED ALIKEComes with 3 keys per box, all 6 keys will work with both boxesSurface MountedHeavy Duty, anti-vandal casing with a sprig loaded safety featureCentre (Off) & Up / Down arrows6 x keys supplied75mm x 75mm x 45mmComes with instructions and ..

Genuine PM1 Handset with sliding cover to protect the buttonsPlease note, this is a genuine PM1 manufacturer handset, NOT a copy.Suitable for PM Paramount control units - please see our related products area below if you require the complete box  The Remote controls have independent Open, ..

High Quality Genuine PM1 Remote Control System complete with 2 x Handsets with sliding covers to protect the buttonsSuitable for roller shutter doors which have a 230V tubular motor fitted.  The Remote controls have independent Open, Close & Stop Buttons.Plug in terminals, receiver acc..

Roller Shutter Industrial Key SwitchSurface MountedHeavy Duty, anti-vandal casing with a sprig loaded safety featureCentre (Off) & Up / Down arrows3 x keys supplied75mm x 75mm x 45mmComes with instructions and wiring diagramSuitable for industrial and residential roller shutter doorsPlease see o..

Roller Shutter Industrial Key Switch - Keyed AlikePLEASE NOTE, THIS PRODUCT IS FOR A KEYED ALIKE KEY SWITCH - SO YOU NEED TO CHANGE THE QUANTITY TO HOWEVER MANY YOU REQUIRE AND THEY WILL BE ALL SENT OUT USING THE SAME KEY. IF YOU ONLY REQUIRE 1 KEY SWITCH, PLEASE SEE OUR RELATED PRODUCTS AREA BEL..

An adjuster tool which allows the adjustment of the upper and lower motor limits on a roller shutter tube motorWill adjust on tubular motors for both domestic and industrial/commercial doorsAlso known as a stick or wandis 4mm on the endAdjusts the limits on a tube motor which have the twist limit ad..

SWS SeceuroGlide 4 Channel Transmitter To suit current SWS SeceuroGlide roller doorsBattery (included); CR2032 - you can purchase additional ones in our 'additional products which may help' area below 868mHz Black and Chrome  SWS Part ..

SWS SeceuroGlide 4 Channel Transmitter To suit current SWS SeceuroGlide roller doorsBattery (included); CR2032 - you can purchase additional ones in our 'additional products which may help' area below 868mHz Black and Chrome  Please see our r..

SWS SeceuroGlide 4 Channel Transmitter To suit current SWS SeceuroGlide roller doorsBattery (included); CR2032 - you can purchase additional ones in our 'additional products which may help' area below 868mHz Black and Chrome  Please see our r..

SWS SeceuroGlide 2 Channel Transmitter - please see our related products below for the 4 channel (4 button) version To suit current SWS SeceuroGlide Seceurosense roller doorsBattery (included); CR2032 - you can purchase additional ones in our 'additional products which ma..

SWS SeceuroGlide 4 Channel Transmitter - please see our related products below for the 2 channel (2 button) version To suit current SWS SeceuroGlide Seceurosense roller doorsBattery (included); CR2032 - you can purchase additional ones in our 'additional products which ma..

Genuine SWS Teleco SeceuroSense Bottom Slat Transmitter - which takes 2 x 1.5V batteries or 2 x 3.6V batteries by sliding a switch inside the transmitter.  This is the later transmitter which had the ability to use either 1.5V or 3.6V batteries as garage door fitters and end users were struggli..

Genuine SWS Teleco eceuroSense Bottom Slat Transmitter - which takes 2 x 3.6V batteriesIf you require the bottom slat transmitter that takes a 1.5V battery or the grey Somfy version, please see our related products area at the bottom of this pageSWS Part No: EC7110OTCSP240A09B..

Genuine SWS Teleco SeceuroSense Control Panel Receiver - this works with the 1.5V Bottom Slat Transmitter (EC751O0) - see our related products area at the bottom if you need this.SWS have used several panels on their roller shutters, this one has a code on the side of EC860O0 and TVPTP868A10S. If yo..

Genuine SWS Teleco SeceuroSense Control Panel Receiver KitThis kit consists of the EC860O0 / TVPTP868A10S panel and 1.5V Bottom Slat Transmitter (EC751O0) - see our related products area at the bottom if you want to buy these items separately. This kit will also replace boxes with the code EC85..

Genuine Teleco Automation Bottom Slat Transmitter - which takes 2 x 3.6V batteriesIf you require the bottom slat transmitter that takes a 1.5V battery or the 3.6V which has a different code of EC7110O, or the grey Somfy version, please see our related products area at the bottom of this pageBST-S25E..

Genuine Teleco Control Panel Receiver - this works with the 1.5V Bottom Slat Transmitter (EC751O0) - see our related products area at the bottom if you need this.There are several panels that look the same on roller shutters, this one has a code on the side of EC860O0 and TVPTP868A10S. If your box h..

Genuine Teleco Control Panel Receiver - this is a TVNRG868E02 panel that works with a wired safety edge (there will be a curly cable running from the wall box to the junction box on the bottom slat of your door).  If you require the curly cable and junction box, or optical eyes, see our related..

Genuine Teleco Control Panel Receiver - this is a TVNRG868E02 panel that works with a wired safety edge (there will be a curly cable running from the wall box to the junction box on the bottom slat of your door).  If you require the curly cable and junction box, or optical eyes, see our related..

Genuine Teleco Control Panel Receiver - this is a TVNRG868E02K panel that works with a wireless safety edge (there will be a plastic box on the bottom slat of your door).  If you require the bottom slat transmitter (BST-S25ENS), rubber seal or optical eyes, see our related products area below a..

Genuine Teleco Control Panel Receiver - this is a TVNRG868E02K panel that works with a wireless safety edge (there will be a plastic box on the bottom slat of your door).  If you require the bottom slat transmitter (BST-S25ENS), rubber seal or optical eyes, see our related products area bel..

Genuine Teleco Control Panel Receiver - this is a TVNRG868E04 panel that works with a wired safety edge (there will be a curly cable running from the wall box to the junction box on the bottom slat of your door).  If you require the curly cable and junction box, or optical eyes, see our..

Genuine Teleco Control Panel Receiver - this is a TVNRG868E04K panel that works with a wired safety edge (there will be a curly cable running from the wall box to the junction box on the bottom slat of your door).  If you require the curly cable and junction box, or optical eyes, s..

Genuine Teleco Control Panel Receiver - this is a TVNRG868E04K panel that works with a wireless safety edge with the code BST-S25ENS and also a photocell (if you require one). Both available in our related products area below if you need them.This box replaces box code TVPRP868N09.There..

Genuine Teleco Control Panel Receiver - this is a TVNRG868E04K panel that works with a wireless safety edge with the code BST-S25ENS and also a photocell (if you require one).  Both available in our related products area below if you need them. There are several panels that look the same o..

Genuine Teleco Control Panel Receiver KitThis kit consists of the EC860O0 / TVPTP868A10S panel and 1.5V Bottom Slat Transmitter (EC751O0) - see our related products area at the bottom if you want to buy these items separately. This kit will also replace boxes with the code EC850O0 on.There are ..

Genuine Teleco Wireless Remote Control Wall SwitchFixes to any indoor wall and is convenient to place in a location to operate your garage doorFinished in a smooth white colour and is 2 channel (meaning has buttons and can operate 2 shutters that both use Teleco panels). Please see our related prod..

Genuine Teleco Wireless Remote Control Wall SwitchFixes to any indoor wall and is convenient to place in a location to operate your garage doorFinished in a smooth white colour and is 4 channel (meaning has buttons and can operate 4 shutters that both use Teleco panels). Please see our related produ..

1 x Universal garage door remote control receiver kitThis radio control sets provide a fast and easy solution to upgrading older garage door remote control handsets and receivers particularly when the original parts are no longer available and the only option seems to be a new opener. Radi..

1 x Universal garage door remote control receiver kit HandsetWorks with the receiver kit we supply - see 2nd image (for identification purposes only).  If you need the full kit, see our related products area below Radio frequency: 433MHz - Rolling Code    ..

Replacement V2 Handset - for Contract 597 (please check the label on the back of your handset for a c597 code)This c597 codes was used on Autoroll garage doors.  See our related products area below for the C694 code handsets.Image 1 shows both the 2 button Phox2 and 4 Button Phox4 handsets - fo..

Replacement V2 Handset - for Contract 694 (please check the label on the back of your handset for a c694 code)Image 1 shows both the 2 button Phox2 and 4 Button Phox4 handsets - for ID purposesThe Remote control has 2 or 4 buttons (this means 2 or 4 channel which means it will work 2 or 4 doors as l..